Toxic material reduction

BACKGROUND

Various chemicals are still used in the manufacture of building materials, despite known or suspected health hazards. Flame retardant chemicals, which are used to increase fire-resistance of materials, include PBDEs (polybrominated diphenyl ethers)—which, based on animal tests, are associated with potential neurobehavioral, carcinogenic and immune effects. Some of these chemicals can bioaccumulate in fat and result in food chain contamination, including human milk. All parts of this feature only apply to materials installed inside the weather proofing membrane of a project.

Reproductive

Endocrine

Part 1
Perfluorinated Compound Limitation

VERIFICATION

No perfluorinated compounds (PFCs) are present in the following condition:

a.³⁶

At levels equal to or greater than 100 ppm in components that constitute at least 5% by weight of a furniture or furnishing (drapes/curtains) assembly.

Letter of Assurance

Part 2
Flame Retardant Limitation

VERIFICATION

Halogenated flame retardants are limited in the following components to 0.01% (100 ppm) to the extent allowable by local code:

a.³⁶

Window and waterproofing membranes, door and window frames and siding.

b.³⁶

Flooring, ceiling tiles and wall coverings.

c.³⁶

Piping and electrical cables, conduits and junction boxes.

d.³⁶

Sound and thermal insulation.

e.³⁶

Upholstered furniture and furnishings, textiles and fabrics.

Letter of Assurance

Part 3
Phthalate (Plasticizers) Limitation

VERIFICATION

DEHP, DBP, BBP, DINP, DIDP or DNOP (often found in polyvinyl chloride [PVC]) are limited in the following components to 0.01% (100 ppm):

a.³⁶

Flooring, including resilient and hard surface flooring and carpet.

b.³⁶

Wall coverings, window blinds and shades, shower curtains, furniture and upholstery.

c.³⁶

Plumbing pipes and moisture barriers.

Letter of Assurance

Part 4
Isocyanate-Based Polyurethane Limitation

VERIFICATION

Isocyanate-based polyurethane products are not used in:

a.¹⁶

Interior finishes.

Letter of Assurance

Part 5
Urea-Formaldehyde Restriction

VERIFICATION

Urea-formaldehyde presence is limited in the following components to 100 ppm:

a.¹

Furniture or any composite wood products.

b.¹

Laminating adhesives and resins.

c.¹

Thermal insulation.

Letter of Assurance

	Core & Shell	New & Existing Buildings	New & Existing Interiors
Part 1: Perfluorinated Compound Limitation	-	O	O
Part 2: Flame Retardant Limitation	-	O	O
Part 3: Phthalate (Plasticizers) Limitation	-	O	O
Part 4: Isocyanate-Based Polyurethane Limitation	-	O	O
Part 5: Urea-Formaldehyde Restriction	-	O	O

	Commercial Kitchen	Education	Multifamily Residential	Restaurant	Retail
Part 1: Perfluorinated Compound Limitation	O	O	O	O	O
Part 2: Flame Retardant Limitation	O	O	O	O	O
Part 3: Phthalate (Plasticizers) Limitation	O	O	O	O	O
Part 4: Isocyanate-Based Polyurethane Limitation	O	O	O	O	O
Part 5: Urea-Formaldehyde Restriction	O	O	O	O	O

Verification Methods Matrix

	Letters of Assurance	Annotated Documents	On-Site Assessment
Part 1: Perfluorinated Compound Limitation	Architect & Owner
Part 2: Flame Retardant Limitation	Architect & Contractor
Part 3: Phthalate (Plasticizers) Limitation	Architect & Contractor
Part 4: Isocyanate-Based Polyurethane Limitation	Architect & Contractor
Part 5: Urea-Formaldehyde Restriction	Architect & Contractor

Standard Citations

1

U.S. Green Building Council. LEED v4: Reference Guide for Building Design and Construction. Washington D.C.: U.S. Green Building Council; 2013: 37, 43-44, 541-552, 567, 605, 623, 645-53, 658-61, 682-3, 685-6, 723-4.
25.5.a	USGBC's LEED 2009 for Healthcare MR Credit sets limits for furniture and medical furnishings including textiles, finishes and dyes, to less than 100 ppm of at least four out of five chemical groups, including urea-formaldehyde.
25.5.c	USGBC's LEED 2009 for Healthcare MR Credit sets limits for furniture and medical furnishings including textiles, finishes and dyes, to less than 100 ppm of at least four out of five chemical groups, including urea-formaldehyde.
25.5.b	USGBC's LEED 2009 for Healthcare MR Credit sets limits for furniture and medical furnishings including textiles, finishes and dyes, to less than 100 ppm of at least four out of five chemical groups, including urea-formaldehyde.

16

U.S. Environmental Protection Agency. Methylene Diphenyl Diisocycanate and Related Compounds Action Plan.http://www.wftaylor.com/wp-content/uploads/2012/03/EPA_MDI_Action_Plan.pdf . Published April 2011. Accessed October 17, 2014.
25.4.a	The EPA's Methylene Diphenyl Diisocyanate and Related Compounds Action Plan outlines the risk of exposure to isocyanate-based compounds.

36

**U.S. Green Building Council. Pilot Credit 54: Avoidance of Chemicals of Concern. http://www.usgbc.org/node/2606894?return=/pilotcredits/Commercial-Interi.... Accessed September 15, 2014.**
25.1.a	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building materials may not include perfluorinated compounds at levels equal to or greater than 100 ppm.
25.2.c	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) brominated or halogenated flame retardants containing bromine, chlorine, or fluorine.
25.2.d	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) brominated or halogenated flame retardants containing bromine, chlorine, or fluorine.
25.2.e	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) brominated or halogenated flame retardants containing bromine, chlorine, or fluorine.
25.2.a	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) brominated or halogenated flame retardants containing bromine, chlorine, or fluorine.
25.2.b	USGBC's LEED v3 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) brominated or halogenated flame retardants containing bromine, chlorine, or fluorine.
25.3.a	USGBC's LEED v4 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) of phthalates.
25.3.c	USGBC's LEED v4 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) of phthalates.
25.3.b	USGBC's LEED v4 Pilot Credit 54 requires that third party certified building products not contain more than 0.01% by mass (100ppm) of phthalates.

This is a legacy version of the WELL Building Standard. Please check the latest version here.

Toxic material reduction

Toxic material reduction

BACKGROUND

Part 1 Perfluorinated Compound Limitation

Part 2 Flame Retardant Limitation

Part 3 Phthalate (Plasticizers) Limitation

Part 4 Isocyanate-Based Polyurethane Limitation

Part 5 Urea-Formaldehyde Restriction

Applicability Matrix

Verification Methods Matrix

Standard Citations

Part 1
Perfluorinated Compound Limitation

Part 2
Flame Retardant Limitation

Part 3
Phthalate (Plasticizers) Limitation

Part 4
Isocyanate-Based Polyurethane Limitation

Part 5
Urea-Formaldehyde Restriction